Onda Lifting's Differentiated Approach

1. Customized Design and Handpiece Strategy Before Treatment

The director personally analyzes the patient's face to create a lifting plan. They meticulously identify areas requiring elasticity improvement and contouring, and carefully allocate and use 3mm and 7mm handpieces. Specifically, areas where hollowing of the cheeks is a concern are avoided, and energy is concentrated on areas requiring tightening.

2. Sufficient Energy Application

During facial treatments, energy can be set from 60,000 to 120,000 Joules. Rather than indiscriminately applying a large amount of energy, it is adjusted according to the patient's skin condition and desired direction of improvement.

3. Delicate Speed Control Know-how

The heat transfer effect of Onda treatment can vary depending on the handpiece movement speed. Areas requiring heat accumulation are treated slowly, while sensitive areas are treated quickly, to reduce excessive heat generation while still achieving sufficient results.

4. Precise Shot Distribution by Area

Beyond simply using 3mm/7mm handpieces, shots are meticulously distributed considering the patient's skin volume and fat distribution. For example, in cases with less fat, 3mm is primarily used, while for double chins or lower jawlines with more fat, the proportion of 7mm handpieces is increased.

Special Approach to Onda Lifting Treatment

Instead of proceeding with Onda lifting treatment at only 90W from the beginning,

we apply a method of rapidly raising the temperature with high power of 100-110W initially, and then maintaining it at 90W.

Key Differences in Treatment Method

Shortened Onset of Tissue Reaction

Even when the same total energy is applied, starting the treatment with high power results in a more rapid increase in tissue temperature.

This allows for quick attainment of the zone where energy is sufficiently accumulated,

and the onset of skin reaction can be accelerated.

Reduced Energy Loss in Core Reaction Area

Applying high power for a short duration allows the desired temperature to be reached before heat disperses to surrounding areas.

This helps reduce epidermal stimulation while inducing a thermal reaction focused on the dermis and subcutaneous fat layers.

Increased Efficiency Relative to Treatment Time

If treatment is performed only at 90W, it may take more time to reach the reaction zone.

Additionally, a greater number of Joules may be required to achieve a sufficient thermal reaction.

Conversely, starting with high power allows the required heat to be reached in a short time,

and subsequent power adjustment allows for safe treatment progression.

Perceptible Changes After Treatment

Compared to a 90W standalone treatment,

the lifting effect may be felt sooner,

and a more distinct feeling of skin tightening may be experienced immediately after the treatment.

Furthermore, by adjusting the power before the sensation of heat rises above a certain level,

it can help reduce excessive pain or discomfort during the treatment.

In conclusion, even with the same total energy (60,000 Joules), depending on the power control method,

treatment results may vary individually,

and these subtle differences can positively impact the outcome.

Key Aspects of Onda Lifting

Simultaneous Lifting and Tightening Effects

Onda Lifting delivers energy to the dermis and subcutaneous fat layers using ultra-high frequency microwaves (2.45GHz). This makes it a next-generation lifting device that can simultaneously offer lifting and tightening improvements.

It utilizes the principle of microwaves vibrating water molecules in the skin to generate frictional heat. This process induces collagen contraction and production, and aids in the reduction of fat cells, allowing for immediate lifting changes, which is a key feature.

Microwaves have the property of being absorbed by water in the skin to generate heat. Thanks to this, it's possible to selectively deliver concentrated energy to the dermis and subcutaneous fat layers while minimizing stimulation to the epidermis.

A distinctive feature of Onda treatment is that it allows for considering both lifting and tightening effects simultaneously through a single device.

Lifting, which refines the facial line, and tightening, which improves skin elasticity and texture, have different purposes. The Onda treatment is designed to achieve both of these effects simultaneously.

Key Principles of Onda Lifting

The Onda Lifting procedure uses two types of handpieces: 3mm and 7mm.

The 3mm handpiece delivers energy to the boundary between the skin's dermal layer and subcutaneous fat layer.

When heat energy is delivered to this depth, the production of collagen and elastin fibers can be promoted. Additionally, by inducing the contraction of existing collagen and aiding in hyaluronic acid production, immediate skin tightening can be felt.

As water is expelled from edematous fat, changes in the facial line can be observed immediately after the procedure.

The 7mm handpiece is designed to reach deeper into the subcutaneous fat layer, selectively damaging fat cell membranes and inducing cell apoptosis.

Damaged fat cells are naturally expelled from the body through the lymphatic system. This can lead to a more refined facial contour. Typically, changes begin to appear from 2-3 weeks, with contour changes visible around 4 weeks, and the most noticeable effects after 6 weeks. Since the destroyed fat cells do not regenerate, the results can be maintained for a relatively long period.

Energy can also be delivered to the retaining ligaments, inducing their contraction, which can lead to an immediate lifting effect.

Temperature Control: Collagen in the skin's dermal layer is induced to contract at temperatures of approximately 60-65 degrees Celsius. Therefore, skilled technique in slowly moving the handpiece to accumulate sufficient heat is crucial to effectively raise the temperature to this level.

Water-Selective Absorption Principle: Microwaves have the characteristic of being selectively absorbed only by water. Thanks to this, they deliver minimal stimulation to nerves or blood vessels, primarily focusing heat energy on fat cells and the water layer within the dermis. Consequently, it is a lifting procedure that results in less pain during treatment and can lower the risk of side effects.

Treatments Expected to Create Synergy When Combined

While we also perform Onda Lifting as a standalone treatment at our clinic, you can experience even greater synergy when combined with Shurink (which acts on the fascia layer) or Oligio (tightening using high-frequency waves).

Receiving multiple treatments on the same day can shorten the heat accumulation time, potentially leading to higher patient satisfaction.

Medical Philosophy of Our Head Director

At our clinic, multiple Onda Lifting procedures are performed daily.

However, instead of applying the same lifting design to all patients, we customize the design to suit each individual's skin condition and characteristics.

Our head director constantly contemplates and researches how to provide even more satisfying lifting results even after the procedure.

We believe that true lifting treatment goes beyond mere device operation; it involves accurately understanding skin texture and the overall flow of the face to delicately design individual contour changes.

Onda Lifting is not just about the equipment; the difference lies in the practitioner's skilled hand techniques.

Our clinic provides such delicate and professional treatments.

Reasons to Expect Rapid Changes with Onda Lifting

Onda Lifting utilizes microwave energy to intensively deliver heat only to depths of 3mm and 7mm within the skin.

During this process, collagen fibers within the skin can be rapidly heated to over 65 degrees Celsius, resulting in immediate contraction.

Immediately after the procedure, changes in the facial line and lifting effects can be visually observed.

Without the need to wait for a slow process of change,

The ability to immediately feel improved elasticity and lifting effects is one of Onda Lifting's important features.

This may be a suitable treatment method for those who expect rapid changes.

Features of Onda Lifting at Our Clinic

1. Pre-treatment Design and Handpiece Utilization Strategy

At our clinic, we place great importance on a meticulous design process before the treatment.

The director consults directly with the patient to thoroughly analyze skin elasticity, fat distribution, facial volume, and the direction where lifting is needed. Based on this comprehensive analysis, customized treatment areas are designed.

According to the analysis results, the 3mm handpiece (dermal layer stimulation) and 7mm handpiece (fat layer targeting) are applied optimally to each treatment area.

Beyond simply using the device, strategic lifting treatment based on design is performed.

2. Sufficient Energy Delivery and Precise Settings

In Onda Lifting treatment, the total amount of energy is a crucial factor.

At our clinic, customized treatments ranging from 60,000 joules to over 120,000 joules are possible for each patient. Time allocation appropriate for the treatment volume and cooling strategies to prevent overheating are also meticulously planned and executed.

3. Handpiece Speed Control and Heat Accumulation Management

The core of Onda treatment is lifting through effective heat accumulation.

At our clinic, in the initial stages of treatment, the handpiece is moved at a slow speed to accumulate heat, and in the latter stages, it is switched to a faster speed to reduce the risk of burns while performing an effective treatment.

The skilled experience of the medical team is crucial for treatment settings.

4. Customized Handpiece Utilization and Shot Strategy

When there is a lot of volume or when skin elasticity reduction is the main concern, different treatment shot strategies are applied.

Considering facial volume, fat distribution, and skin thickness, 3mm and 7mm handpieces are adjusted at an appropriate ratio for the treatment.

For instance, a 7mm handpiece is primarily used for the jawline area where fat is concentrated, and a 3mm handpiece is mainly applied to the area below the cheekbones where volume reduction is a concern.

Beyond simply delivering energy, we proceed with treatments by establishing patient-customized distribution strategies.

5. Treatment Design by Chief Doctors, In-depth Research and Consideration

At our clinic, we consistently perform Onda Lifting treatments during each daily appointment slot, accumulating extensive treatment experience.

Nevertheless, individual treatment designs always vary.

Outside of consultation hours, our chief doctors simulate changes in each patient's face and continuously research energy settings and handpiece placements that contribute to satisfactory results.

Onda Lifting treatment results may vary depending on the medical team's treatment plan.

Onda Lifting is more than just using equipment; it is a treatment perfected by the medical team's skill and meticulousness.

Recommended for

• 01. Those considering improvement of double chin and jowls, and definition of the jawline.
• 02. Those concerned about deep nasolabial folds and facial sagging.
• 03. Those who felt unsatisfied with contour and elasticity improvement after previous lifting treatments.
• 04. Individuals aged 30-50 experiencing both fat layer and skin elasticity reduction simultaneously.
• 05. Those who wish to reduce the burden of pain or recovery time during treatment.

Treatment Advantages

• 01. Excellent cooling system minimizes pain during treatment.
• 02. Tightening effects can be expected after treatment.
• 03. Immediate return to daily life is possible right after treatment.

Treatment Process

• STEP 01. Cleansing and 1:1 Personal Consultation
• STEP 02. Application of oil to the treatment area
• STEP 03. Onda Lifting Treatment

Post-Treatment Precautions

• ㆍ시술 당일부터 세안과 화장은 가능합니다.
• ㆍ시술 후 약 1주일간은 사우나, 찜질방, 음주 및 흡연을 자제해 주십시오.
• ㆍ시술 부위에 열감이 느껴질 수 있으며, 이로 인해 건조해질 수 있으니 보습 관리에 신경 써 주시기 바랍니다.
• ㆍ외출할 때에는 자외선으로부터 피부를 보호하기 위해 선크림을 사용하는 것이 좋습니다.