Layering Technique Procedure

1. Pre-treatment Preparation Stage

If necessary, cooling or anesthetic cream is applied.

Skin Booster 4D Layering Program

2. 4-Step Skin Booster Layering Stage (utilizing MTS or Potenza RF)

First Skin Booster Ampoule Application

It is applied thinly over the entire skin, thereby completing the skin preparation stage.

This helps induce the desired reaction in the epidermal layer.

Second Skin Booster Ampoule Application

After shallow needling targeting the epidermal layer, the ampoule is applied.

Third Skin Booster Ampoule Application

After needling targeting the basement membrane located at the dermal-epidermal junction, the ampoule is applied.

Fourth Skin Booster Ampoule Application

After intensively needling the pores or scar areas that the patient wishes to improve, the ampoule is applied.

3. Soothing Care

The skin is soothed and finished using a Jaungo modeling pack.

A total of four layering steps are performed in a single treatment. This method helps the skin booster ingredients to be absorbed broadly and evenly into the skin.

The skin booster layering method is a treatment approach that can reduce the burden of recovery by minimizing the possibility of bruising, swelling, injection errors, and hypersensitivity reactions.

Ingredient Absorption Method via Layering Technique

JuveLook has the characteristic that ingredient absorption is not easy by simply applying it to the skin.

Therefore, we use a layering technique that utilizes MTS (Microneedle Therapy System) and needle radiofrequency (Potenza RF) to help skin booster ingredients absorb well into the skin.

The particle size of JuveLook skin booster is approximately 30-50μm. While sufficient absorption can be induced through MTS and Potenza RF devices, we apply the layering technique during the procedure to further reduce potential ingredient loss that may occur during application.

MTS Layering Technique

MTS creates microscopic channels of about 150μm on the skin surface, providing a pathway for skin booster ingredients to be absorbed into the skin.

The 4-step layering using MTS further enhances ingredient absorption.

Priming application to the epidermal layer

Application targeting the epidermal layer after shallow needling

Application to the dermal-epidermal junction

Intensive application tailored to specific areas like pores and scars

After this process, skin soothing care is performed with a Jaungo modeling pack, etc., to minimize inflammatory reactions and complete the treatment.

Potenza RF Needle Radiofrequency Layering Technique

Potenza RF creates microscopic channels of approximately 180μm in the skin. High-frequency heat is then used to temporarily contract these pathways, reducing the backflow of bodily fluids that can occur with conventional needle use. This helps to deliver the JuveLook ingredients more effectively to the dermal layer.

Compared to manual injection, there might be a possibility of ingredient loss. However, it helps to deliver ingredients more uniformly to the desired dermal layer, offering the advantages of reduced pain and stable absorption.

Similar to MTS, needle depth can be adjusted, and thus, this is also performed using a 4-step layering method.

Considering each patient's individual skin condition, MTS and Potenza RF treatments can be appropriately combined and performed.

Why do we use these treatment methods?

JuveLook has the characteristic of being provided in powder form.

Therefore, it requires a process of sufficient dilution in saline solution before treatment to stably control its viscosity.

If treated with a manual injection method, insufficient dilution or improper injection depth could lead to the ingredients clumping in one area, potentially forming nodules.

Furthermore, if the ingredients are injected into the subcutaneous fat layer instead of the desired target layer, the dermal layer, it may be difficult to achieve the expected improvement effects.

When performing injections, it is difficult to completely rule out the possibility of nodule formation, regardless of skill level. At Kkeut Oriental Medicine Clinic, we take this into consideration and strive to help patients reduce discomfort and achieve good results.

At Kkeut Oriental Medicine Clinic, we comprehensively consider everything from controlling the hydration concentration of the medication and managing its viscosity, to securing the effective ingredient delivery pathway, and even the absorption method. We perform customized treatments using a layering technique tailored to each individual's skin condition to ensure effective delivery of active ingredients.

We strive for methods that reduce potential discomfort during treatment while delivering satisfactory results.

What is Juvelook Skinbooster?

Juvelook is a skin booster product containing both Poly-DL-Lactic Acid (PDLLA) and Hyaluronic Acid (HA).

This skin booster can help improve skin texture, reduce pores, alleviate fine wrinkles, and manage acne scars. It is also known to induce collagen and elastin production in the deep dermis, positively impacting overall skin elasticity and density.

PDLLA has a smaller particle size compared to existing PLLA (e.g., Sculptra, etc.). Thanks to this, it boasts excellent skin absorbency and can contribute to relatively lowering the likelihood of discomforts such as nodules appearing after treatment. It has been developed to deliver active ingredients deep into the skin while minimizing inflammatory reactions and the risk of nodules, making it a viable option even for those with sensitive skin.

Juvelook contains the following as its main ingredients:

PDLLA 42.5mg (an ingredient that helps promote self-collagen production in the skin)

Non-crosslinked Hyaluronic Acid 7.5mg (contributes to skin moisture retention and improved barrier function)

When PDLLA is injected into the dermal layer of the skin, it induces the activation of fibroblasts, which produce collagen and elastin fibers.

Of these two components, collagen plays a key role in maintaining skin volume and density, while elastin maintains elasticity.

Therefore, when collagen and elastin fibers increase together, it can positively impact the improvement of issues such as fine wrinkles, enlarged pores, and overall loss of elasticity.

Furthermore, PDLLA stimulates stem cells, inducing the generation of new fibroblasts.

This means it can go beyond simply supplementing aging cellular structures, helping to reconstruct the skin's fundamental structure itself.

Fibroblasts, which produce collagen and elastin fibers in the skin, tend to decrease in number or function as one ages.

Juvelook Skinbooster can go beyond simply activating existing fibroblasts; it can also be involved in inducing the creation of new fibroblasts. This can contribute to more active long-term collagen and elastin fiber production.

Recommended for

• 
  
• 
  
• 01. Those concerned about decreased skin elasticity or enlarged pores
• 
  
• 
  
• 
  
• 02. Those who feel their skin is uneven due to enlarged pores or acne scars
• 
  
• 
  
• 
  
• 03. Those seeking natural, non-artificial improvement in skin volume
• 
  
• 
  
• 
  
• 04. Those concerned about rough skin texture or fine wrinkles
• 
  
• 
  
• 
  
• 05. Those who wish to stimulate their own collagen production but feel apprehensive about injections
• 
  
• 
  
• 
  
• 06. Those expecting improved skin elasticity along with a natural lifting effect
• 
  
• 
  

What is the Clinical Basis for Juvelook?

The efficacy of PDLLA in dermal regeneration has been confirmed through various clinical studies.

Kwon et al., Dermatologic Surgery, 2022: When the PDLLA skin booster was administered a total of 3 times at 4-week intervals, an increase in skin thickness, improvement in dermal density, and enhanced skin elasticity were observed.

Kim et al., Journal of Cosmetic Dermatology, 2021: This study confirmed that PDLLA also influences elastin production. This suggests that it can demonstrate a broader range of fiber regeneration effects compared to collagen-centric products.

Han et al., Lasers in Surgery and Medicine, 2020: In a study on patients with acne scars, the absorption method using MTS (microneedling) was reported to help deliver the medication to the dermis and reduce the possibility of epidermal irritation or side effects.

Director's Thoughts

Many first-time visitors to our clinic experience significant discomfort from even a single skin texture issue.

For example, they may experience enlarged pores or rough skin texture that causes makeup to flake off.

While such concerns may not be apparent to others, they can cause considerable stress for the individual experiencing them.

We recommend Juvelook treatment to those with these skin concerns.

Juvelook can help refine skin texture, manage enlarged pores, and support the skin in maintaining a healthy state naturally.

If you've generally been worried about treatment pain or concerned whether the medication would be effectively delivered to your skin,

we encourage you to consider Juvelook skin booster treatment using Kkeut Oriental Medicine Clinic's layering technique.

Treatment Benefits

• 
  
• 
  
• 01. The combination of U.S. FDA-approved high-molecular PLA (Polylactic Acid) and Hyaluronic Acid can help address various skin concerns.
• 
  
• 
  
• 
  
• 02. It induces self-collagen production within the skin, allowing for gradual, natural changes over time.
• 
  
• 
  
• 
  
• When skin elasticity decreases or skin texture is uneven, this treatment can help improve it. You can also expect relief from fine wrinkles and scars left by acne.
• 
  
• 
  
• 
  
• The ingredients used in the treatment are biodegradable and bioabsorbable. After a certain period, they naturally break down, are absorbed, and disappear from the body, leaving no unnecessary residues.
• 
  
•